home *** CD-ROM | disk | FTP | other *** search
- Readme for FIELDTST directory
-
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- WARNING: DO NOT APPLY ALL THESE PATCHES, UNLESS YOU HAVE BEEN INSTRUCTED TO
- DO SO BY NOVELL TECHNICAL SUPPORT PERSONNEL.
-
- Please Note: These files have not been through the patch test team.
-
- ***********************************************************************
- **************************** GERMAN ***********************************
-
- STACKFIX.PAT 973 30-03-93 10:17a
- TCSFIX.PAT 1073 08-06-93 1:09p
- WNET.EXE 504832 10-29-93 11:20a
- WNETRES.DLL 24576 10-29-93 3:30p
- NLPLIB.DLL 58480 01-05-93 1:59p
-
- ************************************************************************
-
- INFORMATIONEN ÜBER BESTIMMTE FEHLERKORREKTURDATEIEN (GERMAN)
-
- ************************************************************************
-
- STACKFIX.PAT - NetWare Lite Server stack fix patch.
-
- Target: SERVER.EXE
-
- Problem: The server switches to its DOS reentrency stack during
- initialization. The Norton antivirus device driver
- interrupts the server after initialization and does some
- work. The server timer interrupt then kicks in,
- switches to the top of the server DOS reentrency stack
- and corrupts the data that the server had on the stack
- before the timer interrupt.
-
- Symptoms: When the Norton antivirus device driver is loaded and
- SERVER.EXE attempts to load, the server will hang.
-
- ****************************************************************************
-
- TCSFIX.PAT - NwtWare Lite Server TimerCriticalSection=100 patch
-
- File: SERVER.EXE
- Checksums: A1, 145, 74, 165, 64, 40
-
- Problem: Some software/hardware will not function properly (according to
- their manufacturers) under Windows if the TimerCriticalSection
- setting under the [386Enh] section of the SYSTEM.INI file is
- set too high. This patch forces the NetWare Lite SERVER.EXE to
- allow the TimerCriticalSection to be set as low as 100 to
- accomodate these special circumstances.
-
- Symptoms: Software/hardware fails to function properly under Windows and
- the manufacturer states that the reason is that the
- TimerCriticalSection is set too high.
-
- *****************************************************************************
-
- WNET.EXE:
-
- Note: This is not the complete WNET utility, only two files have been
- updated. You should use these only if you currently have WNET.
-
- Symptom: This new file fixes the problem where WNET doesn't release
- the windows resources after exiting WNET. Also fixes the problem
- with creating Network directories with spaces in them.
-
- Instructions:
-
- Copy the WNET.EXE and WNETRES.DLL file into your \NWLITE subdirectory, overwriting
- THE existing WNET.EXE file. Copy the NLPLIB.DLL into your \Windows subdirectory,
- overwriting the exisiting NLPLIB.DLL file. Restart Windows and run the WNET
- utility.
-
- *****************************************************************************
-